توضیحات
Nemetschek SCIA Engineer یک برنامه چند ساختاری تجزیه و تحلیل و طراحی نرم افزار برای انواع پروژه است. این نرم افزار دارای طیف گسترده ای از قابلیت های متفاوت است. از این نرم افزار می توان برای انواع پروژه های طراحی ساختمانهای اداری، کارخانه های صنعتی و پل ها در محیط کاربری آسان استفاده کرد.
امکانات و ویژگیهای نرم افزار Nemetschek SCIA Engineer :
- مدل سازی BIM-like
- استفاده از Grids & Stories
- ژنراتور بادی 3D
- دارای Free loads
- Meshing و refinements
- عملکرد بالا در حل FEA
- دینامیک
- مراحل ساخت و ساز
- طراحی بتن شفاف
- طراحی سازه های فولادی
- طراحی کامپوزیت پرتو
- اتصالات فولادی
سیستم مورد نیاز
Hardware components
| Minimum | Advised | |
| Processor | Intel Core-i5 or AMD Ryzen 5 or similar | Intel Core-i7 or AMD Ryzen 7 or similar |
| Memory (RAM) | 16 GB | 32 GB, or more |
| Graphics Controller | 256 MB, supporting OpenGL 2.1 | 4 GB, or more |
| Free disk space | 5 GB, SSD | 5 GB or more, SSD |
| Resolution | Full High Definition * | Full High Definition or more * |
* 4K is supported for the new interface of SCIA Engineer 25
A 3D mouse is not supported.
Software components
| Supported Windows OS | Windows Server 2019 (64-bit) |
| API link with Revit | SCIA Engineer 25 is compatible with: |
| API link with Tekla | SCIA Engineer 25 is compatible with: |
| IFC | SCIA Engineer 25 is compatible with: |
| SDNF | SCIA Engineer 25 is compatible with: |
Below you can find additional information concerning the hardware components.
Processor
For the processor two parameters are important: the number of cores and the clock frequency. When you perform a linear calculation, the number of cores is the main parameter that determines the speed of the calculation. In a nonlinear and eigenmode calculation, both the number of cores and the clock frequency are determining factors. Next to the previously mentioned calculation types, the design checks run multicore as well. We advise an Intel Core i7 or AMD Ryzen 7 with at least 2.4 GHz.
Memory (RAM)
SCIA Engineer, the solver and the Engineering Report are 3 separate processes that each require memory to perform their actions. Next to these processes, also Windows (min. 1.5 GB) and all other applications take some memory in use as well. To not run out of memory when performing memory demanding calculations, we advise to have at least 32 GB of RAM in the computer.
Graphics Controller
A minimum memory of 256 MB and the support of OpenGL 2.1 is required to run SCIA Engineer. This means that SCIA can also be run with an onboard graphics card. For some models that are graphically more demanding, the onboard graphics card may fail to render the structure. For this reason, we advise a dedicated GPU (Graphical Processing Unit). A low to mid end GPU should be adequate.
Hard Disk Drive (HDD)
Every hard disk with a free disk space of 5 GB can be used to run SCIA Engineer. This does not mean that the HDD is not important. The read/write speed of the HDD has an influence on the performance of SCIA Engineer. In order to increase performance, we recommend an SSD (Solid State Drive). Some available SSD types are:
- (m)SATA: cheap, worst performance;
- M.2: best price/quality ration;
- PCIe: expensive, best performance.
Note that it’s recommended to keep 10% of free space to avoid issues such as reduced performance.
تصاویر
راهنمای نصب
در فایل Readme موجود در پوشهی Crack آمده است.
کرک نسخهی 2018 و 2019 همان کرک نسخهی 2015 است؛ با اعمال این کرک گزینهی New غیرفعال میشود که با استفاده از Project Manager این مشکل قابل رفع است؛ جزئیات بیشتر در پوشهی Crack آورده شده است.
لینک دانلود
هرگونه سوال یا مشکل را فقط از طریق بخش ارتباط با ما مطرح کنید.
Nemetschek SCIA Engineer 2019 v19.1.4033 x86/x64
Nemetschek_SCIA Engineer 2018 v18.1.3035 x86
Nemetschek SCIA Engineer 2015 v15.3.120 x86
گذرواژه فایل(ها): www.downloadly.ir
حجم فایل
1.29 گیگابایت
1 دیدگاه. همین الان خارج شوید
Scia Engineer 2019 works fine. But after saving a project file, when it is tried to re-open that file, the software generates a message ‘Project type not registered’ and will not allow to open the file. This makes it useless. Any solution?